JFC CorriPipe™ is a twinwall drainage pipe manufactured from recycled HDPE. Utilising a twin extrusion process, the two layers are simultaneously extruded one inside the other and heat welded together in one continuous step.

The outer wall is corrugated providing excellent structural strength which reduces the possibility of on-site damage. The inner wall has a smooth seamless finish to assist hydraulic flow. The design unlike traditional single-wall pipe prevents silt accumulation.

Product Code Description NOM. ID (mm) NOM. OD (mm) Lengths/Pack
110TPU 100mm Unperforated CorriPipe™ 94.5 111.5 100
150TPU 150mm Unperforated CorriPipe™ 150 178 33
225TPU 225mm Unperforated CorriPipe™ 225 265 14
300TPU 300mm Unperforated CorriPipe™ 300 354 8
375TPU 375mm Unperforated CorriPipe™ 372 426 5
450TPU 450mm Unperforated CorriPipe™ 445 512 4
600TPU 600mm Unperforated CorriPipe™ 592  680 2


Ideal for gravity surface water and stormwater drainage applications this pipe is used for Highway filter and carrier drains, Rail Track Drainage, Golf Course Land Drainage, Catchpits and Land Reclamation projects. Available in black as standard.

Features & Benefits:

  • Smooth internal plastic bore with reduced hydraulic resistance. Manning’s coefficient of 0.012 allows for greater flow capacity and also a greater factor of safety. This also reduces sediment or debris build-up when compared to concrete or steel.
  • Lightweight when compared to traditional materials such as concrete or steel. (Up to 90% lighter than concrete)
  • Fully leak tested to HAPAS requirements when used with rubber seals.
  • Standard 6m lengths make it quick and easy to install, eliminating wastage and reduces labour and plant costs. (Up to 6 times faster  installation compared to concrete)
  • Parallel corrugations allow pipe to be easily cut square on site as required. (Spiral wound pipe make it very difficult to create a square cut on site if required)
  • JFC CorriPipe™  is available unperforated, fully perforated or half perforated.
  • Manufactured from exceptionally durable HDPE material with excellent corrosion resistance and long term performance.
  • Resistant to most naturally occurring chemicals and is therefore suitable for use on the majority of soil conditions.
  • Can be installed in depths from 0.5 to 10m*
  • Full range of fittings and accessories available

*Contact JFC for guidance on minimum and maximum burial depths.

Quality Assurance:

JFC CorriPipe™ is fully BBA (British Board of Agrément) approved to ensure reliability and long lasting service. It is supported with comprehensive technical support and a network of stockists to ensure availability when and where required.

The following Agrément Certificates have been awarded to JFC Twinwall CorriPipe™ Pipe
  • BBA, HAPAS Roads & Bridges Certificate No 02/H069 (Sizes 150 – 600Ømm inclusive)
  • Quality approved to internationally recognised ISO 9001 – 2015 standard
BBALogoCertNo02_H069 .png

Product Gallery


Click here ask us a question, or request a call back to discuss your requirements today!